Lars Christensen

When buying a 5axis compatible machining center you better have you priorities straight. 1)$Money$ 2)accuracy 3) machine travel etc. The...

#CADCAM #Solidworks #TechnicalSummit #UserGroup

It should not be very hard for the big CAD software companies to figure out that most users put stability and bug fixes as their biggest...

Creating points in Mastercam can be useful in any design that contains more than a couple of arcs and lines, or as if programming WEDM a...

Blocks are often used as a great place to store commonly used custom notes for drawings, but that is not the only block that rock, with...

Having your post asking you questions as it is processing code, and either using the data to trigger other functions in the post or a...

Time to have some code hitting the screen, check out the 3 intros if you missed them; Mastercam Post Processor Intro, Pick your Editor...

#CADCAM #Mastercam #Postprocessor

Selecting, that’s what we do ………. selecting and picking geometry and solids all day long, right? I am confident that you got the...

Got this question asked the other day, and thought maybe it would make it worth for someone if this one year old post got dusted off, and...

Alibre 3D CAD for $99 Looking for 3D CAD? This might be the deal you have been looking for, Alibre offer there $999 for a nice...

Solidworks Extend Entities, You use it? Why? I always recommend new users to spend some quality time getting the handle of the trim tool,...

Solidworks Extend Entities, You use it? Why? I always recommend new users to spend some quality time getting the handle of the trim tool,...

After yesterdays blog post Engineering change, use “Change Recognition” in MastercamX4 it would only be right to also look at a somewhat...

After yesterdays blog post Engineering change, use “Change Recognition” in MastercamX4 it would only be right to also look at a somewhat...

Change Recognition Conclusion I think this is a great feature that came with the X series, as we see more and more models handed down...

Change Recognition Conclusion I think this is a great feature that came with the X series, as we see more and more models handed down...

By the way, did you read Josh Mings of Solidsmack post a few months ago?Extrude. Print. Manufacture. 10 Tips to Design Your Parts for...

I have never in the past found a good use for the viewsheet function in Mastercam, however in MastercamX4 you got some enhancement with...

#CADCAM #Solidworks #Toolbox