Connect Design to Machining— Once Difficult, Now Easy
There is no reason to argue the phrase “Because that is the way we have always done it…” is the stupidest reason for doing anything. However, the reason people are still holding on to this behavior is that of distrust and lack of confidence.
I know that there have been times where I decided to start all over and completely re-program a part when faced with a few design changes. This is happens when there is a disconnect between design and machining.
One question could be: is the CAM system older than the CNC programmer himself? The software is simply not up to today’s standards. Another: are the design changes not communicated clearly enough? CNC Programmers demand clarity! Both scenarios are too risky to gamble when your job could depend on getting the part right.
Take a look at the new, full-blown CAD/CAM system: Fusion 360 from Autodesk; this is the manufacturing software that will take you to the Future of Making Things.
First and most important, the magic of having your toolpaths connected directly to the same geometry the designer used to create the part. No disconnect and no invading each other’s spaces. It is simple: the design updates, the toolpaths are flagged, and the CNC programmer can update with a click of a button.
No need to send files by email, convert your data into other formats or ask people to download viewers. From within Fusion, you can share your design by using nothing other than their email address. They can view, measure and make markups in their web browser. And, don’t worry about platforms—This runs on Windows, Linux, Mac, even on mobile devices.
We have never been busier in the manufacturing world. Design changes are more frequently, as no one has the time to sit down and double check anything. You need to have a design and manufacturing package that can be flexible and help to keep track of things.
You costumers will demand that you can handle change. Within Fusion 360, everything is version-controlled in the background, so everyone can go back and forward between design changes. Your manufacturing department doesn’t have to stall, since there are no trust and confidence issues, as the design is connected directly to the machining toolpaths. To put it simply: more money can now be made.
Check out this video:
Want to learn more about Fusion 360? Check out this link: